BioMedical Life Systems, is proud to introduce it’s new generation in Electro-Therapy Devices, the QuadStar Elite four channel (up to 8 electrodes) TENS, NMS, High-Volt and Interferential stimulator in one portable unit.

It’s compact size and user friendly programming features make the QuadStar® Elite’s design unique among Electro-Therapy Devices. The device has an easy to read LCD screen and a digital keypad. Simple to understand instructions guide the user through nine pre-programmed protocols and four types of waveforms; Symmetrical Biphasic Square Wave; Asymmetrical Biphasic Square Wave; Sine Wave; and Monophasic High-Volt, Twin Peak. The user can sequence two or more modalities for complete treatment.

The device has a patient lock system that, when activated prevents the patient from changing any of the set parameters. When the Patient Lock Systems is turned off, a patient compliance meter is displayed showing how long the device was used. A timer allows the patient to use the device for a specified period of time. The device comes ready to use, with all accessories, and is run by a rechargeable battery pack (included) or Wall Adapter.

• Dimensions: 5.55" x 5.25" x 1.65" (14.1 cm x 13.40 cm x 4.15 cm)
• Weight: 18.5 oz (574 g)
• Power Supply: Internal Battery P/N QSE 601 NiCad Battery Pack; External Specifi ed Power Supply: P/N L60071 Medical Grade Power Supply.
• Channels: (4) for INF, NMS, and TENS (2) Active (red) & (1) Dispersive (black) for High Voltage
• Electrodes/Leadwires: (4) Lead Wires - Style L00013MC (2) GV0014R (red single wires) and (1) GV0014B (Black single wire)
• Tolerance: +/- 1%

• Waveform: Continuous Sinusoidal
• CH1/CH3 (Carrier) Frequency: 4000 Hz
• CH2/CH4 Frequency: 4001-4150 Hz adjustable
Beat Frequency: 1-150 Hz
• CH1/CH2 are an Interferential Pair
• CH1: Fixed Frequency (4000 Hz)
• CH2: Adjustable 4001-4150 Hz
• CH3/CH4 are an Interferential Pair
• CH3: Fixed Frequency (4000 Hz)
• CH4: Adjustable 4001-4150 Hz
• Premodulated INF (Using one Channel): A mixed Interferential Beat Frequency will be produced only out of CH 1 and/or CH 3.
Modes -
• Constant Stimulation
• Alternating Stimulation
• Cycled Stimulation
• Constant: Beat Frequency is adjustable from 1-150 Hz
• Sweep 1: Beat Frequency Modulates from 1-10 Hz and back over 12 seconds (6 second increase, 6 second decrease)
• Sweep 2: Beat Frequency Modulates from 80-150 Hz and back over 16 seconds (8 second increase, 8 second decrease)
• Sweep 3: Beat Frequency Modulates from 1-150 Hz and back over 20 seconds (10 second increase, 10 second decrease.
• Intensity: 0-78 milliamps peak to peak
• Output Voltage: 0-39 Volts peak to peak

• Waveform: Symmetrical, biphasic, square Asymmetrical, square
• Pulse Rate: Adjustable 1-120 Hz peak to peak
• Pulse Width: Adjustable 50-400 uS
• On Ramp: 0-10 seconds
• On Time: 0-99 seconds
• Off Ramp: 0-10 seconds
• Off Time: 0-99 seconds
Modes:
• 1. Constant: Use the Constant Mode or a Pulse Rate greater than 60 Hz. for the relaxation of muscle spasms only. Use of continuous stimulation and/or rates above the normal physiological range (e.g., greater than 60 Hz) could lead to rapid onset of muscle fatigue, making the device less effective in producing repeated forceful muscle contractions.
• 2. Cycled
• 3. Reciprocating
• Intensity: 0 - 120 mA from peak to peak (adj)Mo
• Voltage: 0- 60 volts from peak to peak (adj.)

• Waveform: Asymmetrical Biphasic Square
• Pulse Rate: Adjustable 1-120 Hz
• Pulse Width: Adjustable 10-250 µS
Modes:
• Constant: Pulse Rate (Hz) is adjustable from 1-120 Hz and Pulse Width (µS) is adjustable from 10-250 µS.
• Pulse Width Modulation: Decrease/Increase of set width 50% over 5 second cycle.
• Pulse Rate Modulation: Decrease/Increase of set width 50% over 5 second cycle.
• Pulse Width & Pulse Rate Modulation: Pulse Rate and Pulse Width alternately decrease and increase 50% of their set values over 5 seconds cycle.
• Strength Duration 1: Increase of set Pulse Width 40%, decrease of set Pulse Rate 45% and decrease of Amplitude 10% over a 3 second period. Values return to original settings over the next 3 second period.
• Strength Duration 2: Increase of a set Pulse Width 60% decrease of set Pulse Rate 90% and decrease of set Amplitude 13% over a 6 second period. Values return to original setting over the next 6 seconds.
• Cycled Burst (B1): 2.5 seconds on, 2.5 seconds off. Adjust able Pulse Rate 1-200 Hz. Adjustable Pulse Width from 10-250 μs.
• Cycled Burst II (B2): 8 pulses per 0.25 seconds, off for 0.25 seconds. Adjustable Pulse Width from 10-250 μs.
• Intensity: 0-100 mA peak to peak
• Voltage: 0-50 Volts peak to peak

• Waveform: Pulsed galvanic twin peak monophasic delivered in pairs
• Channels: 2 active outputs - 1 dispersive return
• Output Voltage: 0 - 350 volts adjustable
• Output Current: 0 - 700 mA peak, Adjustable
• Pulse Width: Inter pulse intervals of 100 (μS) ,fixed.
• Pulse Rate: 1 - 120 Hz, adjustable
Modes:
• Constant Stimulation
• Alternating Stimulation
• Cycled Stimulation
• Polarity Switch: Positive/Negative polarity of active electrodes (A1 & A2)
• Ramp On: 0-10 seconds
• On Time: 0-99 seconds
• Ramp Off: 0-10 seconds
• Off Time: 0-99 seconds