Spa2Go Inflatable and Portable Whirlpool Spa With Care Kit

• FREE UPS Ground Shipping anywhere in the continental USA
• Includes Spa2Go Combo Care Kit
• Simple and fast to set up
• Space for you & 3 friends
• Micro air-jets provide relaxing massage
• Instant fun, just add water

For a special limited time offer, purchase the Spa2Go Inflatable and Portable Whirlpool Spa With Care Kit and Shipping is FREE !

Relax, de-stress and enjoy a soothing spa experience anywhere, anytime with the Spa-2-Go portable inflatable spa. Why pay thousands for a spa when you can own a Spa-2-Go for under $800. This ingenious hot tub is equipped with an exclusive micro air-jet system for relaxing massaging action. Spa-2-Go offers a full 250 gallon capacity, seats four people and requires no installation.

The Spa 2 Go is easier to access then traditional Spas or Whirlpools. The soft liner means you can enjoy your new spa for hours without fear of red spots or pressure sores!!

Keep your Spa sparkling clean and ready to use all season long with the Spa2Go and Spa-N-A-Box Combo Care Kit This versatile kit includes all needed chemicals to maintain and keep your Spa comfortable and clean year round. The Combo Care Kit can be used with both the Spa2Go and the Spa-N-A-Box.

Spa2Go Features:

• Portable, inflatable spa
• Enough space for you & 3 friends
• Simple and fast to set up
• Inflates using spa's motor
• Goes anywhere you go
• Plugs into standard 120v household outlet
• No special plumbing or wiring needed
• Digital temperature control
• Micro air-jets provide relaxing massage
• 1000-watt heater
• Tough K80 vinyl
• 250 gallon capacity
• Outside diameter 82"
• Inner diameter 58"
• Height: 28"
• Filtration system
• Insulair thermal cover included
• One-Year limited warranty

Spa2Go Specifications:

• Standard Spa2Go locking cover & filters included
• Capacity: 3-4 Adults
• Gallons: 250
• Outer diameter: 74"
• Inner diameter: 58"
• Height: 28"
• Unit weight: 68 lbs.
• Horsepower: 1.3
• Filled weight: 2245 lbs.
• Loading: 76 lbs./sq. ft
• Cover: Locking soft cover (4 locks) included
• Massaging Turbo Blower - 1 HP
• Pump: Fractional HP Circulation Pump
• Heater: Stainless steel - 1000W
• Heat rise: Approx. 1-1 1/2 degrees/hr
• Temperature control: User adjustable - 104F max.
• 100+ air jets welded into the spa
• Temperature controls: solid state
• Filtration system: 15 SF cartridge
• Replacement Filter Cartridge: FC9902
• GFCI Protection: Yes
• Comfort: Air-filled bottom cushion
• Construction: Ultra SK80 Vinyl - gulf grey interior
• Power Requirement: 110-120 VAC - 15A
• Power Cable: 10 ft. cord
• Current Draw: Only 12 amps with heater & all features operating
• Cartons: One: 21" x 24" x 20"
• U.S. Electrical Listing: ETL to UL standard 1563
• Europe/Canada Listings: CE & CSA
• Setup Time: 10 Minutes (typical)

Spa 2 Go Setup Instructions:

1. Unfold Spa 2 Go Liner into a flat position
2. Use inflator hose. Connect it to the power pack on the air blower side (right) to inflate the spa. Inflate all valves
3. Connect all three power pack fittings to spa and hand tighten. Then simply fill with a garden hose
4. Fill inflatable insulation bladder with inflator hose
5. Place the inflatable insulation bladder over your new Spa2Go. Push all sides down for a tight fit
6. Place the top over your new Spa2Go then line up all 8 cover locks