Shop AllegroMedical.com with confidence and know you're getting a great deal! However, if you find a lower price (including shipping) on another website, we'll match it. Just call or email us, either before you've made your purchase or within 30 days after your purchase. Some restrictions apply. Read our Best Price Guarantee for complete details.
The Drive Medical Universal Cup Holder easily attaches to wheelchairs, rollators or walkers with tubing diameter from 5/8" to 1". New clamp allows cup holder to swivel to keep contents level. Special clamp insert can be added or removed as necessary to accommodate different size tubing.
Questions:
What kind of cup holder do I need for a Quickie too with tubular,swing out armrests?
0 Answers
Question By: Beth on Jun 13 2001 8:36 PM
No answers yet. Be the first to answers the question!
Questions:
what colors do these come in?
0 Answers
Question By: bimjell on Aug 11 2022 5:17 PM
No answers yet. Be the first to answers the question!
Questions:
Where can I find a cup holder for a power chair?
0 Answers
Question By: Nan on Aug 11 2016 12:48 AM
No answers yet. Be the first to answers the question!
Questions:
can this cup be taken off easily because I I have a folding chair when I close the chair it goes up to the arm rest,so the cup holder would prevent that from happening unless it is easily removed. is it easily remove and easy to put back on?
1 Answers
Question By: pete on Nov 30 -0001 12:00 AM
Unlikely. The cup assembly requires attachment to a vertical support with a plastic "U shaped section," that will be difficult to remove. The cup holder can be taken off by removing the knob and hex head bolt, but with difficulty. Potentially the 12 point recessed star can be damaged in the process.
Answer By: Badger on May 13 2006 11:56 AM
Questions:
my drive cup holder keeps turning. how can you stop this from happening
1 Answers
Question By: kobe on Nov 30 -0001 12:00 AM
The question does not describe what part of the cup holder is rotating. There are three possibilities. If the cup is rotating on the vertical tube of the chair arm the rubber insert (part B) may be missing or the diameter of the upright tubing is smaller than the design standard. If the rubber insert was not installed and is available, the try installing the insert per directions.
If the cup is rotating on the vertical chair arm support, the most probable cause the cup holder is incorrectly mounted to the “U shaped section.†(part A) Check to make sure the hex head bolt is inserted into the cup holder. The bold head should be flush with the inside wall of the cup. Note the aluminum insert in the cup holder has a hex head on the outside of the cup holder. One side of the U shaped section is flat and the other has a recessed 12 point star. Be sure recessed star is mounted securely to the hex head insert in the swivel cup holder, in the desired position. Be careful it is easy to flatten the point of the star. After the U shaped section is installed on the vertical tube of the chair arm, I discovered it is easier to mount the swivel cup holder to the U shaped section, in the desired position, then insert the bolt through the U shaped section and attach the knob provided. Note: It may take some pressure to press the bolt through the outside part of the U shaped section and to properly seat the hex head of the bold. Note: If the recessed 12 point star of the U shaped section is stripped a new part will be needed. Suggest contacting the vendor or the manufacturer.
Answer By: Badger on May 13 2006 11:46 AM
Questions:
Can this holder, hold a 32 oz drink from a fast food stores
1 Answers
Question By: gerry on Nov 30 -0001 12:00 AM
yes
Answer By: Joe on Jan 13 2004 7:14 PM
Questions:
Can this holder, hold a 32 oz drink from a fast food stores
1 Answers
Question By: gerry on Nov 30 -0001 12:00 AM
No, its not deep enough. Only good for a coffee cup!
Answer By: J on Dec 12 2017 9:53 PM
Questions:
Can this holder, hold a 32 oz drink from a fast food stores
0 Answers
Question By: gerry on Nov 30 -0001 12:00 AM
No answers yet. Be the first to answers the question!
Questions:
will this cup holder work on power chairs or scooters
0 Answers
Question By: mema on Nov 30 -0001 12:00 AM
No answers yet. Be the first to answers the question!
Questions:
will this cup holder work on power chairs or scooters
1 Answers
Question By: mema on Nov 30 -0001 12:00 AM
IT WILL FIT ANY WHEELCHAIR OR SCOOTER THAT HAS A 3/4IN BAR OR ROD ON IT ANYWHERE. A 7/8TH IN BAR IS JUST A BIT MUCH FOR THE HOLDER UNLESS YOU USE A LONGER BOLT..
Answer By: FRITZ on Jun 14 2005 12:49 AM
Questions:
my drive cup holder keeps turning. how can you stop this from happening
1 Answers
Question By: kobe on Nov 30 -0001 12:00 AM
We had to use JB weld and glued it to keep it from rotating. We tried using everything that was sent with it and this was what we ended up doing. Working well.
Questions:
What kind of cup holder do I need for a Quickie too with tubular,swing out armrests?
0 Answers
